Showing posts with label white. Show all posts
Showing posts with label white. Show all posts

Sunday, December 16, 2012

Easy Gift Plaque

So, I wanted to be crafty for Christmas. I have made all of the gifts for our family. However, you don't get to see any of them until after Christmas because they all read my blog! All, of course, except my dad. He does not read blogs, so you get to see his gift. Hurray!

The Finished Product:



What You Will Need:


  • Wooden plaque - I got mine from Michael's and used my 50% off coupon. SCORE.
  • Spray primer
  • Any color of spray paint in matte
  • Wooden decorations
  • Picture stand ($3 from Michael's - I just love that place)
  • Not pictured - spray finishing gloss
  • Not pictured - wood glue
  • 8.5" x 11" Card stock
  • Pazzle, Cricut, Sillouette, or Xacto Knife and stencil
  • Sponge brush
  • Acrylic paint

Let's Get Started:


1. Spray your plaque with primer.
2. Let dry for about 10 minutes, spray with your color. I only did one coat because I did a really good coat of primer and didn't need to. Thank goodness for primer.
3. Leave plaque to dry.
4. Pick your quote and fire up your Pazzle, Cricut, Sillouette, or grab your Xacto knife and stencil. I decided on a font and then cut it out of card stock.
5. I love my mom's Pazzle, but I always have to do some trimming.
 6. Lay your newly created stencil on top of your (now dry) plaque. Mine didn't move, so no worries about tacking it down. Start sponging your paint lightly into the stencil. Be sure to use only a small amount of paint or it will bleed through the stencil (Oops, I did that - oh well, it makes it more homemade-y ...right?)
7. Carefully pick up your stencil.
8. Adhere your wooden decoration using wood glue.
9. Allow to dry for a few hours and VOILA!


As always, thanks to my beautiful mama, who is my loving and faithful assistant/master crafter!










Sunday, July 15, 2012

Double Bow


My mom has always done my hair (everyone knows I love braids!) and made my hair accessories. For my first post, this is a great tutorial for something that is super quick and easy, and cheap (you don't really need to buy 8 colors of ribbon like we did).

THE FINISHED PRODUCT:




What you will need:
  • 1 yard plus 2.5 inches of 1.5" grosgrain ribbon in whatever color suits you
  • hair elastics (for ponytail ribbon)
  • alligator clips (for clip in ribbon)
  • fabric scissors (we use Fiskars)
  • crafting wire
  • fabric glue
  • wire cutters
  • glue gun

NOW THAT YOU HAVE EVERYTHING, LETS GET TO IT:

1. Cut 6" of wire and set aside.
2. Cut 2.5" of ribbon and set aside.
3. Take your yard of ribbon and fold it in half

4. While folded, slide wire through the fold and twist wire tightly around ribbon (still folded)

5. Open ribbon and lay flat with wire facing up.
6. Fold one side of the ribbon in so that the loop is approximately 2.5"

7. Fold it back towards the center with the same size loop remaining. You should have two loops now.

8. Repeat this process with other half of the ribbon. You should have four loops now and leftover ends. DON'T CUT THEM. We will make them pretty later!

9. The wire should be behind the ribbon. Wrap wire around the WHOLE thing tightly. Twist wire to make secure. Add a drop of hot glue to secure end of wire. Set the bow aside for now.

10. Pick up your small ribbon. 
11. Fold ribbon into thirds the long way, putting a line of hot glue inside each fold to secure.

12. Place a drop of hot glue on back of bow and secure one end of small ribbon perpendicular to the bow.
13. Cut approximately 3" of wire.
14. Wrap small ribbon tightly around the bow. Place wire on bow and hot glue the end of the small ribbon onto the wire. Hold firmly until glue dries.

15. Feed wire through the alligator clip and twist to secure. We add a drop of hot glue to keep the bow from wiggling on the clip!
16. To finish the bow, fold the end of the excess ribbon in half and cut on an angle
.
17. For nice neat ribbon that doesn't fray, my mom uses a lighter to very quickly singe the ends. It is important that it is done quickly and carefully so that we don't have any fires or burn marks!!

18. VOILA! Pretty ribbon on a clip.

note: for a bow on a ribbon, go back to step 12 and instead of adding wire before you glue the small ribbon down, add a hair tie. EASY.

We made two ribbons in 20 minutes, and we were making it up as we went. This is an EASY project. Happy bow-heading!